“We’re looking for a modern, practical kitchen, made using solid wood” Part 3

With the installation of the stone bench tops, wood wall shelves, white splash back tiles, oven top and range hood the work is complete. The result is as Laura and Michael wanted, as depicted in the images offered as a guide right at the start – see part 1.
To contact me for information on how to achieve a real timber kitchen, go to woodwoodwoodwood.com

IMG_3917-0.JPG

IMG_3923-0.JPG

IMG_3914-0.JPG

IMG_3913.JPG

IMG_3916.JPG

IMG_2965.JPG

“We’re looking for a modern, practical kitchen, made using solid wood” Part 2

After studying the previous images shown in Part 1, recycled Oregon was chosen for the fascia timbers: this wood being available, the right colour and most importantly, affordable enough to fit into Laura and Michael’s budget. A few samples were prepared and they were invited to the workshop to inspect them. The interiors would be built using E2 environmentally friendly, moisture resistant white board. The construction work using this would be carried out in the workshop and then moved to the house for installation and fitting of the timber doors, drawers and framing. See pictures of the partial completion of the kitchen.

IMG_2958.JPG

IMG_2964.JPG

IMG_2960.JPG

IMG_2963.JPG

Project: reclaimed, recycled timber to hand crafted dining table. Final part 8

From back of car to family home.
The table is now in situ and Therese and Mark are delighted with the result. It’s remarkable to think that the Australian cedar wood in this table – very likely cut from forest along the north coast of New South Wales more than 100 years ago – was recently stair material covered in coats of paint and carpet only metres from where it now continues to exist!
Thank you to everyone who has followed this series of posts. Please share with others, like woodwoodwoodwood on Facebook and look out for the revamped website. All inquiries welcome too.

IMG_3124.JPG

IMG_3584-0.JPG

IMG_3592-0.JPG

Project: reclaimed, recycled timber to hand crafted dining table. Part 3

Now to remove all metals from the salvaged timber.
To detect embedded nail and tack heads, an electric wire brush removes layers of paint. Then the age old task of extracting begins using pliers and a hammer. This is important, as the next step will be to run the timber through machines which have finely ground knives which can be costly to repair. See part 4 for the reveal.

IMG_3354.JPG

IMG_3353.JPG